Manufactured to very tight tolerances and from the highest-quality materials, PLA 3D Printing Filament does not require a heated print bed and is less prone to warping than other filament materials. Designed for compatibility with most commercially available printers, it can be cut, filed or glued post printing, but polylactic acid filament should not be used with acetone. With diameter tolerances of 0.03mm or less, filament ensures consistent feeding and stable prints every time. Custom spool is designed for strength and balance for uniform feeding. It is packaged in a vacuum-sealed bag, including desiccant, to promote longevity and prevent the introduction of moisture.
Specifications
Additional Information
Manufactured to very tight tolerances (+0.03mm diameter) using the highest quality materials to ensure consistent feeding and stable prints
Custom spool designed for strength uniform performance and trouble-free feeding
Filaments packaged in vacuum-sealed bag with desiccant to prevent introduction of dust and moisture.
PLA (Polylactic Acid) filament for use with 3D printers - degradable bioplastic derived from plants.
Easier to print - less prone to warping than other filament materials.
Can be cut filed or glued post printing - do not use with acetone.
Compatible with most commercially available non-cartridge based 3D printers.
For best performance an extrusion temperature between 200-220°C.
Heated build platform not required.
Environmentally friendly - guaranteed not to contain heavy metals phthalates; BPA Free.
Diameter Tolerance: 1.75 ± 0.03 mm
Process Temperature: 200 to 220° C
Net Weight: 2.20 lbs (1.00 kg)
Gross Weight: 3.00 lbs (1.36 kg)
Spool Diameter: 20.00 cm (7.87 In)
Spool Depth: 7.20 cm (2.83 In)
Hub Diameter: 10.20 cm (4.02 In)
Hub Hole Diameter: 5.10 cm (2.01 In)
Heated platform required?: No
Recommended Storage Temperature: -20 to 50° C
TAA Compliant
Brand Name
Verbatim
Country of origin
Japan
Filament Diameter
68.9 mil
Manufacturer Part Number
55251
Manufacturer Website Address
http://www.verbatim.com
Marketing Information
Manufactured to very tight tolerances and from the highest-quality materials PLA 3D Printing Filament does not require a heated print bed and is less prone to warping than other filament materials. Designed for compatibility with most commercially available printers it can be cut filed or glued post printing but polylactic acid filament should not be used with acetone. With diameter tolerances of 0.03mm or less filament ensures consistent feeding and stable prints every time. Custom spool is designed for strength and balance for uniform feeding. It is packaged in a vacuum-sealed bag including desiccant to promote longevity and prevent the introduction of moisture.